EN 10216-1 P195 Steel Pipe
EN 10216-1 is a European standard that specifies seamless steel tubes with circular cross-section for pressure applications. “P195” refers to the minimum yield strength of 195 MPa (Megapascals). P195 steel grade is a non-alloyed high-quality steel. Seamless EN 10216-1 P195 steel tubes are used in a wide range of industries, especially in applications that require high pressure resistance and reliability.
Gnee is an experienced supplier of steel tubes. We can offer you EN10216-1 steel tubes in all grades and size ranges. We also offer steel fabrication services where tubes can be cut, welded, bent, machined, pre-coated, pre-lined, beveled, or processed to your specifications. Please email us today for the latest prices.
General Parameters Of EN 10216-1 P195 Steel Pipe
| Product | EN 10216-1 P195 Seamless Steel Tubes |
| Manufacture | Seamless process |
| WT | 2mm-50mm |
| OD | 14mm-509mm |
| Length | Fixed(6m,9m,12,24m) or normal length(5-12m) |
| Ends | Plain End, Beveled End, Treaded |
| Origin | China |
| Monthly Output | 20 million-30 million pieces per month |
| Applications | Hydraulic system pipeline pipe, pipe for boiler project, etc. |
| Surface | Tubes will be varnished (Outside only) to prevent rust. |
| Marking | Standard + Steel Grade + Size + Heat No + Lot No |
| Inspection | non-specific or specific inspection for quality TR1; specific inspection for quality TR2. |
| Testings | Chemical analysis, Tensile test, Impact test, Electromagnetic test, Dimensional inspection, Visual examination, Non-Destructive Testing |
| The steel name | (1)the capital letter P for pressure purposes; (2)the alphanumeric TR1 for qualities without specified aluminium content, impact properties and specific inspection and testing requirements ; (3)the alphanumeric TR2 for qualities with specified aluminium content, impact properties and specific inspection and testing requirements. |
Tube Manufacture And Delivery Conditions Of EN 10216-1 Steel Pipe
EN 10216-1 P195 steel pipe shall be manufactured by seamless process. Forming process and delivery conditions are shown in the table.
| Forming operation | Quality | Delivery condition |
| Hot formed | TR1 | As formed or normalized or normalizing-formed |
| TR2 | Normalized or normalizing-formed | |
| Hot formed + cold finished | TR1 and TR2 | Normalized |
Chemical Composition Of Seamless Steel Tubes EN 10216-1 P195
| C, % | Si, % | Mn, % | P, % | S, % | Cr, % | Ni, % | Cu, % | Mo, % | Nb, % | Ti, % | V, % |
| 0.13 max | 0.35 max | 0.70 max | 0.025 max | 0.020 max | 0.30 max | 0.30 max | 0.30 max | 0.08 max | 0.01 max | 0.04 max | 0.02 max |
| C, % | Si, % | Mn, % | P, % | S, % | Cr, % | Ni, % | Cu, % | Mo, % | Nb, % | Ti, % | V, % | Al, % |
| 0.13 max | 0.35 max | 0.70 max | 0.025 max | 0.020 max | 0.30 max | 0.30 max | 0.30 max | 0.08 max | 0.01 max | 0.04 max | 0.02 max | 0.02 min |
Mechanical properties Of EN 10216-1 P195 Seamless Steel Pipes
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| 320-440 | 195 min | 27 min |
| Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
| 320-440 | 195 min | 27 min |
Tolerances of EN 10216-1 Seamless steel tube
| Outside diameter D mm | Tolerances on D | Tolerances on T for a T/D ratio | |||
| ≤ 0,025 | > 0,025 ≤ 0,050 | > 0,050 ≤ 0,10 | > 0,10 | ||
| D ≤ 219,1 | ± 1% or ± 0,5 mm whichever is the greater | ± 12,5 % or ± 0,4 mm whichever is the greater | |||
| D > 219,1 | ± 20 % | ± 15 % | ± 12,5 % | ± 10 % a | |
| a For outside diameters D ≥ 355,6 mm it is permitted to exceed the upper wall thickness locally by a further 5 % of the wall thickness T | |||||
| Length L | Tolerance on exact length |
| L ≤ 6 000 | + 10 0 |
| 6 000 < L ≤ 12 000 | +15 0 |
| L > 12 000 | +by agreement 0 |
Applications And Advantages of Seamless EN 10216-1 P195 Steel Pipe
Gnee has been providing high quality steel pipes with a variety of excellent properties to customers around the world for 15 years. Get a quote now.
Seamless Construction
The pipes are manufactured without a welded seam, which enhances their strength and pressure resistance. Seamless pipes are typically made through processes like hot rolling, cold drawing, or hot extrusion.
Temperature Resistance
Seamless P195 steel pipes material can withstand moderate temperatures, making it suitable for applications involving steam, hot water, or other fluids within certain temperature ranges.
Good Mechanical Properties
The P195 steel grade offers good tensile strength. The material is relatively ductile, allowing it to withstand deformation without cracking, which is crucial for applications involving bending and forming.
Certification & Quality Assurance
Pipes under EN 10216-1 P195 standard are subject to rigorous testing for mechanical properties, dimensions, and pressure resistance to ensure compliance with the specified requirements.
Why Choose Gnee As A Steel Pipe Distributor?
In addition, our tubes have been successfully exported to more than 60 countries such as Vietnam, Malaysia, Indonesia, Pakistan, UAE, and South Korea, etc. Many regular customers visit our company and factory and make multiple orders.
What Services Does Gnee Provide?
Gnee can provide the following measurement services for pipe:
1. Dimensional measurement: Measure the dimensional parameters such as length, width, and thickness by measuring instruments to ensure the pipe is qualified and meets the design requirements.
2. Surface measurement: Measure parameters such as flatness, unevenness, and surface roughness of pipe surface to help ensure that the quality and surface state of the pipe meet the requirements.
3. Thickness measurement: Use a thickness measuring instrument to accurately measure the thickness of the pipe to ensure that it meets the design requirements.
4. Material measurement: Use material analysis instruments to measure the chemical composition and mechanical properties of the product to ensure that the quality and performance meet the requirements.
5. Bending and Deformation Measurements: The degree of bending and deformation of the steel pipe is measured and monitored by using tools such as bending measuring instruments and displacement sensors to ensure that it is within the allowable range.
Gnee can customize the size and shape of steel pipes for your project according to specific project needs. The custom design of the pipe is carried out by a professional engineer and design team. Based on the requirements and constraints of the project, they will use calculation and simulation tools, combined with experience and technical knowledge, to optimize the steel pipe design to meet the specific needs of your engineering.
● According to the strength requirements of structural design, adjust the thickness, width, and length of pipes.
● The shape of the steel pipe can be designed according to the characteristics of the project.
● If you consider the convenience of installation and maintenance, we can also add openings and passages for easy access and operation in the design for areas that require frequent maintenance.
Purchasing Gnee steel pipe can provide the following deep processing services. We can customize according to the specific needs of customers to meet the requirements.
Cutting service: Pipe can be custom cut to obtain the desired shape and size according to the needs of customers. For example, flame cutting, plasma cutting, laser cutting, etc., can cut steel pipes into required blocks, special-shaped parts.
Bending and forming: Pipes are bent and formed by stress application and appropriate processes to obtain the desired shape.
Welding service: Pipe can be subjected to various types of welding services, including manual arc welding, gas-shielded welding, laser welding, etc.
Turning and machining of holes: Turning and machining of holes in pipes by using machining equipment. These processes produce smooth surfaces, precise holes and threads to meet specific assembly requirements.
Surface treatment: In order to improve the corrosion resistance and aesthetics of the steel pipe, surface treatment can be carried out. This includes methods such as spraying, hot-dip galvanizing, electroplating, etc. to add a protective layer and provide corrosion resistance.
Gnee can provide the following testing services through third-party testing agencies. These third-party testing services can provide independent, objective verification that pipes comply with relevant standards and regulations.
Material chemical composition analysis: Through chemical composition analysis, determine whether the composition of the steel pipe meets the standard requirements.
Mechanical performance test: Mechanical performance test includes tensile test, impact test, bending test, etc., which are used to determine whether the mechanical properties such as strength, toughness and ductility of products meet the specified requirements.
Metallographic testing: Through metallographic testing, check the structure, grain size, non-metallic inclusions, etc. of pipes to evaluate their quality and performance.
Corrosion performance test: Through the corrosion performance test, evaluate the corrosion resistance of pipes, including salt spray corrosion resistance, chemical corrosion resistance, etc.
Hardness test: Hardness test is used to measure the hardness of pipe, and its strength and wear resistance can be evaluated according to the hardness value.
Ultrasonic flaw detection: Ultrasonic flaw detection is used to detect internal defects of pipes, such as cracks, pores, inclusions, etc.
